Quick Answer: How Much Horsepower Can You Get Out Of An Lt1 Motor?

How much HP does a lt1 383 stroker have?

Quite simply, it’s strong, it can make a lot of power and it goes in easily.

While the original ’92-97 LT1 was not a high-output motor, the reverse is true of LT1 crate engines from Golen Engine.

Available with displacements of 383 and 396 cu in, these make up to 550 hp and 500 lb-ft of torque..

How much HP can a 6.2 lt1 handle?

6.2L LT1 V8 ENGINE The star of the Chevrolet performance lineup, the 6.2L LT1 V8 with the capability of 455 horsepower and 455 lb. -ft. of torque, will accelerate the 8-speed automatic Camaro SS from 0 to 60 in 4.0 seconds flat.

Is the lt1 better than ls1?

Despite its additional power advantages, at 5.7L (350 cubic inches) in the LT1, it actually has a bigger engine capacity than the 5.665L (345.7 cubic inch) LS1. LS1’s feature a 6-bolt main, with LT1 featuring either 2, or 4-bolt. This refers to the total number of bolts which attach the main bearing caps to the block.

Is the lt1 a good engine?

Its lighter, costs nearly as little, makes more power, and has just as big of an aftermarket. The LT1 is a great engine, but the LS1 is an amazing engine. There’s are reason the LS1 is one of the most talked about engines in the entire world.

What size motor is a lt1?

5, 6.2LThe new LT1 is the Gen. 5, 6.2L, small block engine used in Chevrolet performance cars. It was introduced in the 2014 C7 Chevy Corvette. LT1 engines are all-aluminum and use Active Fuel Management (AFM) and Variable Valve Timing (VVT).

What does LT lt1 mean?

LT-1 is the engine code, not to be confused with small block 350 LT1 motor available around 1970 on the Corvette, Camaro, etc. That’s why they engrave numbers on the block and heads.

How much would it cost to rebuild a lt1 engine?

If you pay $800-1000 for a running stock LT1 you are getting ripped off, no more than $500 ever. And you can rebuild one for $300 to withstand 7000rpm and 600 fwhp.

How long does a lt1 engine last?

cab companies all over this country will tell you that a well maintained LT1 will last upwards of 500K miles.

How much power does a lt1 make?

Power Specifications The LT1-equipped Corvette features 300 horsepower and 330 ft.

How much does it cost to make a 383 stroker?

You can put a 383 together to handle about 400-450 horses for probably $1500-$1600. That would be a short block. It’s probably possible to build it for around $1200 everything off a 400 and 350 except for new pistons, rings, and bearings.

How much boost can a lt1 handle?

The LT1 can handle up to around 700rwhp reliably, but there have been cases before that and after that where the ring gaps have caused issues. LT4 and LT1 are not really close at all. LT4 is lower compression, forged pistons, different heads, different cam.

Is a lt1 a LS engine?

The LS1 and LT1 are two GM engines that are very popular among enthusiasts. The LS1 engine is the newer design that replaced the older LT1 engines. … The LT1 engines produced prior to the release of the LS1 engines were rated at 260 hp, while the LS1 engine debuted at 345 hp and gradually increased over the years.

How reliable is the lt1 engine?

A lot of people say that because these cars usually are a pain to work on. But if taken care of they are very reliable just as any other car. Almost 140,000 on mine and no major engine problems.

Do Camaros have alot of problems?

Like most older model vehicles, the Camaro tends to have some problems, but luckily most of them aren’t too serious.

How much horsepower does a 5.7 lt1 engine have?

370 horsepowerLT1 legacy Displacing 350 cubic inches (5.7L), with a compression ratio of 11:1, it was rated at 370 horsepower at 6,000 rpm and 380 lb. -ft. of torque at 4,000 rpm. It was enough to push the Corvette from 0 to 60 mph in less than six seconds.

How can I get more horsepower from my lt1?

Stage One — 20 to 30 Extra Horsepower On your average LT1, a new set of performance plug wires and plugs will net about 5 horsepower at the wheels, and a cold-air intake should be worth 3 to 5 horsepower.

Is a lt1 a 350?

LT1. In 1992 General Motors introduced the LT1, 350 cu in (5.7 L) Small Block whose name was a tribute to the original LT-1.

How much power can a lt1 block handle?

Stock block is good for 1000+hp with upgraded internals. Stock short block is good for somewhere between 600 and 800 depending on who you ask.