- Is Vortec and LS the same?
- What LS motor has the most horsepower?
- What LS motor do I have?
- How much does an aluminum LS block weight?
- What year LS motor is the best?
- What is the best LS block to build?
- Which 6.0 LS is the best?
- What is the difference between LS and LT engines?
- How much HP can a 5.3 LS make?
- Are 5.3 and 6.0 cranks the same?
- Why is the LS motor so good?
- Which LS engine has aluminum block?
- Are all LS blocks aluminum?
- What vehicles have aluminum LS engines?
- Which LS engine is best?
Is Vortec and LS the same?
Although Vortec engines are “LS” based they are NOT LS engines IMO.
Besides most Vortec’s being iron block, as seen above there are some serious size differences and considerations depending on your project.
VORTEC ENGINE IN CARS: For the most part, it will be challenging to put a Vortec truck engine into a car..
What LS motor has the most horsepower?
LS7In stock form, an LS7 makes 505 horsepower and 470 pound-feet of torque making it the most powerful naturally aspirated engine that General Motors has ever put in a production car.
What LS motor do I have?
To get the right parts, you need to know which version of the LS you are starting with. The easiest way to tell the difference is to check the 8th digit of the VIN code on the original vehicle. Follow this link to Identify an LS Engine by VIN.
How much does an aluminum LS block weight?
around 109 lbsHere’s the numbers at a glance: The Aluminum 5.7 L LS block came in around 109 lbs. The Iron 5.3 LS block came in around 218 lbs.
What year LS motor is the best?
Best LS EnginesLS9/LSA: Made for the 2009-2013 Corvette ZR1, the LS9 is a supercharged 6.2L engine rated at 638 horsepower — the most powerful of all small blocks. … LS1: This is the one that started it all! … LS7: Introduced in 2005, the LS7 sported 427 cubic inches, making it the largest small block ever.More items…•
What is the best LS block to build?
The most desirable castings are the 6.0L LQ9 or LQ4 truck blocks, which are production cast iron blocks, with 6-bolt iron main bearing caps, 9.240-inch deck height, and offer a 4.00-inch bore.
Which 6.0 LS is the best?
However, all five can be honed to 3.89-inches to use LS1 or LS6 pistons. If it is a large bore that you crave, the 6.0L blocks (LQ4 and LQ9) are the best of the Gen IIIs. These iron anchors were used in the heavier duty trucks, SUVs, and vans.
What is the difference between LS and LT engines?
The LT’s direct injection fuel system is vastly more complex than any LS engine’s. This adds a lot of unknowns to any project. … The LT also lacks a power steering pump for those that are looking to retrofit a Gen V engine into a vehicle that has hydraulic power steering.
How much HP can a 5.3 LS make?
The stock 5.3L is factory rated around 320 hp with 340 lb-ft of torque.
Are 5.3 and 6.0 cranks the same?
due to stroke differences and each had different casting numbers. … The 6.0L crank has the same stroke (92mm) as the 5.3L and 5.7L cranks.
Why is the LS motor so good?
The main reason that they’re such a compact V8 engine is because of their “old-school” pushrod design, as well as all of the modern designs they used when designing the engine block. The push-rod design that they continue to use is unlike almost all modern engines that have overhead cams.
Which LS engine has aluminum block?
With the noted exception of the early LQ4 engine, all LS engines have aluminum cylinder heads. The LS2 and L76 are noteworthy in that they are both Gen IV 6.0L aluminum block engines, and that they came from the factory in both cars and trucks.
Are all LS blocks aluminum?
LS engines can have an aluminum or an iron block. LS engines are ALL considered small blocks. Though some have a big-block displacement, like the LSX 454 crate engine (Exception being the 8.1 Vortec which is a big block). There are two very different generations of the LS engine, which are the Gen III and Gen IV.
What vehicles have aluminum LS engines?
It would instead be the series of iron-block, aluminum-head LS engines produced under the Vortec brand name for Chevrolet, GMC, Cadillac, and Hummer trucks that would greatly expand the family. These are found in displacements that included 4.8-liters (LR4), 5.3-liters (LM7, L59, LM4), and 6.0-liters (LQ4, LQ9).
Which LS engine is best?
In short, the best engine for your LS or Vortec swap is the one you can afford. Sure, we would all love a shiny new LS3 crate engine from Chevrolet Performance or a rebuilt 5.3L long-block from Summit Racing, but once we crunch the numbers that’s not always possible.