Question: Is It OK To Use 10w30 Instead Of 10w40?

Is 10w40 good for winter?

Yes, although they are both technically 10w oils, a 10w-40 is much thicker in cold conditions compared to a 10w-30..

What is the thickest motor oil you can buy?

Applications of 10W-40 Motor Oil Drivers commonly use 10W-40 motor oil in vehicles with higher mileage because the oil is thicker while the engine is hot; this helps lubricate older moving parts. This oil is meant to start up vehicles in winter climates that experience temperatures of 10 degrees Celsius.

Do you use thicker oil in winter?

Thin oils that are less prone to thickening in low temperatures will help you start your engine more quickly in winter while thick oils that are less prone to thinning in hot temperatures will help your engine perform better in summer.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

10w30 is a multi-grade engine oil ideal for heavy-load engines because of its ability to withstand hot temperatures for a long time without compromising the performance of the engine. This engine oil has a viscosity grade of 10 in low temperatures and 30 in high temperatures.

Is 10w40 good for high mileage?

The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well. As long as you’re not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle.

Will the wrong oil damage my engine?

Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so. Contrary to what some believe, adding synthetic oil to regular oil won’t harm the engine, but there’s also no benefit in doing so.

Can I use 10w40 instead of 10w60?

The 3.2 engine is basically the same as a 3.0 or 2.5 which are spec’d for 10W40 for normal driving or 10W60 for ‘sporting’ driving. So 10W40 is not going to do any harm at all if you just use the car normally. If you are hard on it I would go for the 10W60, or maybe go for a good 10W50 like I did.

When should I use 10w40 oil?

When to Use 10w30 vs 10w40 Using 10w30 oil in cold weather will help reduce excessive oil temperatures and drag as the engine warms up. Using 10w40 oil in the summer will help the oil stick to internal components in high temperatures, avoiding the wear and tear from metal-to-metal contact between moving parts.

Do high mileage cars need thicker oil?

High-mileage motor oil doesn’t hurt and it could prevent leaks from starting. … Some mechanics recommend switching to a thicker (higher viscosity) oil — such as 10W-30 full synthetic oil instead of 5W-20 full synthetic — or using oil additives to stop leaks.

Is 10w30 good for high mileage?

Pennzoil High Mileage SAE 10W-30 Motor Oil is engineered for cars that have accumulated more than 75,000 miles, particularly those that are experiencing oil leaks and oil burn off. Engines with higher mileage tend to experience more wear than new engines.

Which oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Which is better 10w30 or 10w40?

The difference between 10W-30 and a 10W-40 is the high temperature viscosity. Obviously, a 10W-40 is thicker than a 10W-30 at high temperature. … Remember that using oil with a viscosity that is too high can result in excessive oil temperature and increased drag.

Does thicker oil run hotter?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.